PerkinElmer AAnalyst 700, User Manual

Page: 47 / 194

Spectrometer Installation
0993-5255
2 -3
Before you install the spectrometer
When the spectrometer arrives

Check the exterior of the shipping crate for obvious signs of damage. If the
crate has been damaged, file a claim with the authorized carrier immediately
and inform your nearest PerkinElmer office.

Contact your local PerkinElmer office to arrange for the installation.
Before the service engineer arrives

You must prepare a suitable site for the spectrometer and any accessories.
See
Chapter 6, Laboratory Requirements , and the guides for any accessories.

You must make sure that the fume ventilation system and the necessary gas
supply lines and regulators are installed.

Although you should not perform the initial installation yourself, we
recommend that you read the installation instructions to learn about the
spectrometer and its requirements before you start using it.
These instructions are also provided in case you need to alter any of the
connections or move the instrument.
When the service engineer arrives

The service engineer will remove the spectrometer from the crate and check
that all parts have been delivered. If anything is missing or damaged, the
service engineer will make sure that the respective parts are supplied.

The service engineer will remove the shipping locks, perform pre-installation
checks, install the spectrometer, and make sure that everything functions
correctly.