Pentax 17731, Operating Manual

Page: 254 / 280

252
9
App
endi
x
Data being recorded
Displayed when you try to switch to Q mode while an
image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the
image is recorded or the setting is changed.
Data being processed
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Built-in memory full Displayed if the built-in memory is full when saving a file.
No image to be
processed
Displayed when there are no images or sound files.
This image/sound
cannot be processed
Displayed for files that cannot be processed.
No card in the camera
Displayed if no SD Memory Card is inserted when “Image/
Sound Copy” is selected from the Playback Mode Palette
and the OK button is pressed.
The built-in memory is
not enough to copy
images/sounds
Displayed when there is insufficient built-in memory to
perform copying.
Cannot process
correctly
Displayed when Red-eye Compensation processing fails.
Display image/sound
from built-in memory Displayed when the camera enters the built-in memory
display.
Not enough battery
power remaining to
activate Pixel Mapping Displayed when the batteries are too low during Pixel
Mapping. Change the batteries (p.34) or use the AC
adapter kit K-AC78 (optional) (p.37).
Message
Description