Pentax 17731, Operating Manual

Page: 114 / 280

112
3
Ta
king
Pi
ct
ures
You can set this function to correct for camera shake when taking still
shots. If Pixel Track SR is set to
O (On), the camera automatically
corrects for camera shake in the images you shot. The default setting is
P (Off).
1
Press the 3 button in
A
mode.
The [
A
Rec. Mode] menu appears.
2
Use the four-way controller (
23
) to select [Pixel Track SR].
3
Use the four-way controller (
45
) to
switch between
O
(On) or
P
(Off).
O
(On) Automatically corrects for
camera shake.
P
(Off) No correction for camera
shake.
The setting is saved.
4
Press the 3 button.
The camera returns to capture mode.
Setting Pixel Track SR
Shake reduction settings in C (Movie) and (Underwater Movie)
mode are configured under Movie SR (p.139).
In the following situations Pixel Track SR is turned off and cannot be
selected.
• If the shooting mode is
C (Movie)/ (Underwater Movie)/
X
(Digital Wide)/
C
(Half-length Portrait)/
S
(Fireworks)/
F
(Digital
Panorama)/
N
(Frame Composite).
• When Voice Recording has been assigned to the Green Button and is
being used.
• If the Drive Mode is
j
(Continuous Shooting)/
c
(Burst Shooting)/
g
(10 sec. self-timer)/
k
(Interval Shoot)/
l
(Auto Bracket).
• When the flash is used.
• When sensitivity is set to 3200/6400. Or, when sensitivity is set to
3200/6400 by AUTO sensitivity.
Rec. Mode
MENU Exit
1 / 4
Recorded Pixels
Quality Level
White Balance AWB
12M
Image Tone Bright
AF Setting
Pixel Track SR