Pentax 17731, Operating Manual

Page: 143 / 280

141
3
Ta
king
Pi
ct
ures
The frame moves to [Total Time].
6
Set the total time.
1 Press the four-way controller (
5
).
2 Use the four-way controller ( 23 ) to set the hours, then press
the four-way controller (
5
).
3 Use the four-way controller (
23
) to set the minutes, then press
the four-way controller (
5
).
The frame returns to [Total Time].
7
Press the four-way controller (
3
).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (
5
).
2 Use the four-way controller ( 23 ) to set the hours, then press
the four-way controller (
5
).
3 Use the four-way controller (
23
) to set the minutes, then press
the four-way controller (
5
).
The frame returns to [Start Delay].
9
Press the 3 button.
The Interval movie setting is saved and the camera returns to capture
mode.
10
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
Press the shutter release button fully.
Interval movie recording starts.
The camera turns off between shots (during standby). Press the power
switch during standby to display the remaining time and interval on the
monitor.
The [Stop interval shooting?] message is displayed when the power
switch and then the
3 button are pressed during standby.
Pressing the
4
button cancels interval movie.