Pentax 17731, Operating Manual

Page: 127 / 280

125
3
Ta
king
Pi
ct
ures
5
Press the four-way controller (
3
).
The frame moves to [Number of Shots].
6
Set the number of shots.
1 Press the four-way controller (
5
).
2 Use the four-way controller (
23
) to set [Number of Shots],
then press the four-way controller (
5
).
The setting is saved, and the frame returns to [Number of Shots].
7
Press the four-way controller (
3
).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (
5
).
The current time and the recording start
time are displayed in real-time.
2 Use the four-way controller (
23
) to
set the hours, then press the four-way
controller (
5
).
3 Use the four-way controller ( 23 ) to
set the minutes, then press the four-way controller (
5
).
The setting is saved, and the frame returns to [Start Delay].
9
Press the 3 button twice.
The camera returns to the shooting screen. The operations up to this
point have only configured the [Interval Shoot] settings. To actually use
interval shooting, you must select [Interval Shoot] from the drive mode.
Taking Pictures at a Set Interval (Interval Shoot)
1
p.95
• Interval Shoot is unavailable in
F
(Digital Panorama),
X
(Digital
Wide),
9
(Green), and
S
(Fireworks) modes.
• Refer to p.140 for instructions on interval shooting for
C
(Movie) and
(Underwater Movie).
• Even if an alarm is set, the alarm will not ring while interval shooting is
being performed.
• Interval Shoot stops if the SD Memory Card is removed or inserted
during standby.
The Interval Shoot settings can also be configured from the Drive Mode.
(p.95)
Interval Shoot
MENU
Cancel
Current Time
Start Time
Start Delay hr. min. 0
OK
OK
1 0 : 0 0 AM
1 0 : 0 0 AM
0