Pentax 17731 Operating Manual Download Page 158

Page: 158 / 280

156

Playin

ack

and

De
le

tin
g

Press the

button after taking a picture.

The image appears on the display.

Press the four-way controller (

The Playback Mode Palette appears.

Use the four-way controller (

2345

) to select

(Image Rotation) and press the

button.

The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.

Use the four-way controller
(

2345

) to choose the rotation

direction and press the

button.

The rotated image is saved.

Rotating the Image

• Panoramic images and movies cannot be rotated.
• Protected images can be rotated, but they cannot be saved in a rotated

state.

Four-way controller

button

MENU

Cancel

Summary of Contents for 17731

























































































































































































































































































Search results

Summary of Contents for 17731

Reviews:

Related manuals for 17731

Brands by name

Popular brands

Pentax 17731, Operating Manual

Search results

Summary of Contents for 17731

Reviews:

Related manuals for 17731

Brands by name

Popular brands