Pentair INTELLITOUCH, User Manual

Page: 93 / 128

IntelliTouch
®
Control System User’s Guide
83
Disable/Enable Spa-Side Remote
This feature is useful if you wish to disable the use of the SpaCommnad and iS4 Spa-Side Remote. You
can enable and disable the
spa-side remote with the same button. Each time the button is pressed it toggles between DISABLED or
ENABLED.
Press the MENU button. The
Spa Side Remote Disable/Enable
screen is displayed.
1.
To Disable: Press the button next to SPA SIDE REMOTE
ENABLED. Screen will immediately display SPA SIDE
REMOTE DISABLED. Remote is now off.
To Enable:
Press the button next to SPA SIDE REMOTE
DISABLED. Screen will immediately display SPA SIDE
REMOTE ENABLED. Remote is now on.
2. Press the
Back
button to return to the main screen.
MENU
BACK
DELAY CANCEL
SPA SIDE REMOTE ENABLE
PROGRAM
SETUP
Keypad Lock
If required, the IntelliTouch indoor control panel and
MobileTouch wireless control panel can be passcode protected
so that system settings and operations cannot be accessed.
To access a ‘locked” control panel, the correct previously
assigned four digit passcode must been entered before access
is granted.
Go to the
KEYPAD LOCK
screen
To assign a four digit passcode and enable the Keypad Lock
feature:
1. Press any combination of four digits using the buttons 1-9.
2. Press the ENABLE button to enable the Keypad Lock
feature.
3. Press the EXIT button to return to the main screen.
Providing the control panel is not active (no buttons
pressed), the Keypad Lock feature will be activated in a
few minutes.
Clear Button: Press the CLEAR button to erase the previously
entered four digit passcode. If the Keypad Lock feature is
“Enabled,” pressing Clear will erase the previously entered four
digits and reset the feature to “disabled.”
Enable/Disable button:
Enable: Pressing the ENABLE button after
entering the four digit passcode will enable the Keypad
Lock feature.
MENU SETUP KEYPAD LOCK ADVANCED
Getting There
BACK SAVE ENABLE EXIT
0
1
2
3
4
5
7
6
8
0
KEYCODE 0000
KEYPAD LOCK IS DISABLED
BACK SAVE DISABLE EXIT
0
1
2
3
4
5
7
6
8
0
KEYCODE 4747
KEYPAD LOCK IS ENABLED
Keypad Lock ENABLED