IntelliTouch
®
Control System User’s Guide
15
Go to the
PROGRAM/SELECT
equipment screen. From this
screen you can select SPA, POOL or any of the AUX equipment
circuits to program.
1. Press the top right button next to
POOL
to access the
“Program” screen to program the pool equipment.
2.
To set the start time:
Press the left side button next to
HOURS
(and the start flag icon) to set the start hour. Press the
right side button to set the minutes for the start time. To use
the “EGGTIMER” feature, see page 17.
3.
To set the stop time:
Press the left side button to
HOURS
(and the stop icon) to set the hour to stop the program. Press
the right side button to set the minutes for the stop time. To use
the “ONCE ONLY” feature, see page 16.
4. Press the left side button next to
DAYS
to specify the day(s) to
run the program one time. Choose “
EVERYDAY”
to run the
program one time each day of the five days. To choose specific
days to run the program, press the button next to
DAYS
. The
days of the week screen displays. The LED lights next to the
days of the week will all be lit. To switch off a day, press the
button next to the displayed day. The light switches is off.
To set all day on, all lights should be on. Press
Save
to save the setting. The previous screen will be
displayed.
5. Press
Save
to save the current program. The program counter displays (1/1) indicating that you have
saved one (1) program for the selected circuit. To erase a program press the
Clear
button then
Save
.
6. Press the
Back
button to return to the
SPA, POOL
and
AUX
equipment selection screen to choose
other equipment. Press the
Exit
button to return to the main screen.
Smart Start (Setting up SAm, SAL and IntelliBrite lights)
Smart Start (
SS_Yes/SS_No)
-
When a light circuit function is setup as
a SAM , SAL or IntelliBrite light, use the Smart Start feature (SS_Yes) to
automatically begin changing colors when the light circuit is switch
on.
Smart Start can also be assigned to all other special light circuits
(i.e. Color Wheel, Photon Generator
®
, Light, see page 41).
1. Press the top right button next to
SAM LIGHT
to program the
light circuit. For this example the SAL LIGHT circuit name
has already been selected from the Circuit Names list (see
page 37).
2.
SS_Yes/SS_No
displays next to the light circuit name.
3.
Smart Start
displays at the bottom of the screen. Press the
button on the bottom of the screen to toggle between SS_Yes
and SS_No.
Select
SS_Yes
to automatically begin changing colors when the light circuit is switch on.
4. Setup each light circuit as described above in steps 2 - 5.
MENU PROGRAM
POOL
Getting There
(or any other circuit)
SS_NO
SMART
START
SS_YES
SAL LIGHT
SMART
START
SAVE
MENU/PROGRAM/SAM LIGHT
CLEAR
BACK
Summary of Contents for INTELLITOUCH
Page 9: ...vii IntelliTouch Control System User s Guide BlankPage...
Page 126: ...NOTES...
Page 127: ...NOTES SAVE THESE INSTRUCTIONS...
