Pentair INTELLITOUCH, User Manual

Page: 65 / 128

IntelliTouch
®
Control System User’s Guide
55
MENU/SETP/EQUIP/INTELLICHLOR
BACK EXIT
MODEL NAME HERE
STATUS
DOWN
CONTROL ENABLED
WATER SALT LEVEL
CHLOR
OK - NO ERRORS
2900 PPM
UP HOURS TO RUN 24
YES
SUPER
SAVE
MENU/SETP/EQUIP/INTELLICHLOR
BACK
EXIT
MODEL NAME HERE
STATUS
CONTROL ENABLED
WATER SALT LEVEL
SUPER CHLOR
OK - NO ERRORS
2900 PPM
22 @ 100% HOURS REMAINING
YES
'CANCEL'
SAVE
MENU SETUP EQUIPMENT CHLORINATOR
Getting There
Super Chlorinate the Pool Water
Periodically, it may be necessary to “super chlorinate” the pool and/or spa.
Go to the Chlorinator screen.
1. Press the
SUPERCHLOR
button.
2. The default run time for super chlorination is 24 hours.
Press the buttons next to HOURS TO RUN to change
the run time to super chlorinate.
3. Press Save
when done. The chlorinator will start super
chlorination mode (100%) and automatically switch
on the filter pump. When super chlorination has been
completed the system will return to normal operation.
4. To cancel super chlorination
: Go back to the
Chlorinator Screen. The time left for super chlorination
is displayed.
5. Press the button under
Cancel Super Chlor
.
6. Press Exit
to return to the main screen.
Note: For information about wiring a salt chlorine generator
to the IntelliTouch system , see “Wiring IntelliTouch to a Salt
Chlorine Generator,” on page 112.