Pentair INTELLITOUCH, User Manual

Page: 21 / 128

IntelliTouch
®
Control System User’s Guide
11
Selecting the Heating System
Use the heat menu settings to specify the set point temperature and select the heat source to heat the
pool and spa water. The water will begin to heat when the heater is manually switched on, by pressing
the Pool, Spa button on the Indoor Control Panel or the Valves (V) button on the Outdoor Control Panel,
regardless of the heater selection (off) in the Heat menu. The optional iS10 Spa-Side remote, iS4 Spa
Side remote or QuickTouch QT4 wireless remote can be used to switch the heater on. The IntelliTouch
system supports gas, electric and solar heating systems. IntelliTouch will use the heating source that is
selected. Multiple heaters are supported. IntelliTouch automatically selects the heating system that is
most effective for the user settings. The heat source selections are:
To select the heating system, press the
HEAT
button at the bottom of the screen.
• SPA:
Press the left or right side button next to SPA MODE to select the heating mode for the spa.
• POOL: Press the left or right side button next to POOL MODE to select the heating mode for the spa.
1. Press the
Set
button to save the heat settings.
2. Press the
Back
button to return to the Main screen.
The heat options are:
• OFF
- No heating even though pump and other circuits may be operating.
• HEATER
- Gas heater only. When the heater is active it will continue heating the water until the
heater’s current highest set point temperature triggers the heater sensor (104° F or 40° C). Do not
activate the heater without running the pump. The heater will not run if water flow is not detected.
• HEAT PUMP - Heat pump only.
• H PUMP PREF.
- For when a heat pump is in combination with other heating systems and you want
to use the heat pump only when it is most effective.
HEAT
Getting There
SPA
Press to scroll through SPA
Heating options: OFF, HEATER.
If solar is enabled (see page 74,
77) the options are HEAT PUMP,
Press to scroll through POOL
Heating options: OFF, HEATER.
If solar is enabled the options are
Back button Set button