Pentair INTELLITOUCH, User Manual

Page: 77 / 128

IntelliTouch
®
Control System User’s Guide
67
IntelliFlo VS 3050 and VSF +SVRS Pump Setup
(Continued)
Priming Parameters (IntelliFlo VS 3050)
The Intelliflo VS 3050 pump priming parameters allow the priming speed and duration length/time
selection. The priming speed can be set from 400 RPM to 3450 RPM. The duration time can be set from
0 to 5 minutes, in one minute increments.
Note: If the IntelliFlo pump is powered on, and a priming
parameter is set to a time greater than 0 minutes, the priming speed will be used from that period
(assuming the priming speed is greater than the speed being requested).
To set the IntelliFlo VS 3050 priming parameters:
1. From the main pump screen, press the left side button next to the IntelliFlo VS 3050 pump. Note:
IntelliFlo VS 3050 pump can only be assigned as pump #1, #2, #3, or #4.
2. On the next screen, press the left side button next to “PRIMING PARAMETERS.”
3. From the next screen you can set the pump priming time and speed:
Set priming time: Press the top left or right side button to set the priming time from 0 to 5
minutes, in one minute increments.
Set priming speed (RPM):
Press the priming speed left or right side button to set the pump
priming speed from 400 RPM to 3450 RPM.
4. Press the lower SAVE
button to save the settings.
5. Press the
EXIT
button to return to the Equipment screen. Press EXIT again to return to the main
screen.
MENU SETUP EQUIPMENT INTELLIFLO
Getting There
PRIMING TIME
Set priming time
MENU/SETP/EQUIP/IFLO/SELECT
BACK EXIT
IFLO VS 3050 #2 SPA
NEXT GROUP OF PUMPS
IFLO VF 3050 #1 POOL
IFLO VS 3050 #4 AUX 3
IFLO VSF+SVRS #3
MENU/SETP/EQUIP/INTELLIFLO
BACK EXIT
PENTAIR IFLO VS 3050
IFLO VS 3050 #4
ASSIGN CUSTOM SPEEDS
INTELLIFLO STATUS
PRIMING PARAMETERS
SPA
Select the
IntelliFlo
VS 3050
pump
Press this
button to
access the
PRIMING
MENU/SETP/EQUIP/INFLO4/PRIMING
BACK NEXT
PRIMING TIME 5 MIN
PRIMING SPEED 1000 RPM
PRIMING SPEED Set priming speed