IntelliTouch
®
Control System User’s Guide
16
Using the Once Only Timer
The “Once Only” programming feature enables IntelliTouch to automatically switch equipment on for
one time only. For example, you can set to have the spa and heater switch on before you get home from
work for one evening. Unlike a regular scheduled program, the “Once Only” program does not repeat.
Go to the
PROGRAM/SELECT
equipment screen. From this
screen you can select SPA, POOL or any of the AUX equipment
circuits to program.
The following example describes how to program the spa filter
pump and heater to switch on at a specific time:
1. Press the button next to
SPA
to access the “Program/Select”
screen. If this is the first program, the program counter
displays
(1/0). After this program is saved, (1/1) is displayed (see step
5). Up to 99 total programs may be created for all circuits
combined.
2. Press the left side button next to
HOURS
and select
ONCE ONLY
(Once Only is displayed one press
after 11:00 PM).
3. Press the left side button next to
HOURS
to set the start time.
Note:
Press the button under CLEAR to reset the default
settings.
4. Press the left side button next to
DAYS
to specify the day(s)
to run the program one time. Choose
EVERYDAY*
to run the
program one time each day of the five days. If the time you
are setting has passed for today, the
ONCE ONLY
program
is set for the next day. To choose specific days to run the
program, press the button next to
DAYS
. The days of the week
screen displays. The LED lights next to the days of the week
will all be lit. To switch off a day, press the button next to the
displayed day. The light switches off. To set all days on, all lights should be on.
Note (*): If you select EVERYDAY, the programmed time will occur the next day or later the same
day if the time has not yet been reached. If you select a certain day of the week (only one) the
programmed time will happen the next day of the week.
5. Press
Save
to save the current program. The program counter displays (1/1) indicating that you have
saved one (1) program for the selected circuit.
6. Press the
Back
button to return to the
SPA, POOL
and
AUX
equipment selection screen to choose
other equipment.
7. Press the
Exit
button to return to the main screen.
SS_NO
SMART
START
SPA
ONCE ONLY
1/0
MENU/PROGRAM/SPA
MENU/PROGRAM/SELECT
DISPLAY
EXIT
BACK
Summary of Contents for INTELLITOUCH
Page 9: ...vii IntelliTouch Control System User s Guide BlankPage...
Page 126: ...NOTES...
Page 127: ...NOTES SAVE THESE INSTRUCTIONS...
