IntelliTouch
®
Control System User’s Guide
71
MENU
SETUP EQUIPMENT INTELLIFLO
Getting There
BACK
EXIT
PENTAIR IFLO VS 3050
IFLO VS 3050 #3
125 RPM 50 WATTS
STATUS NORMAL
I
ntelliFlo VS 3050 status screen
Press this
button to
access the
INTELLIFLO
STATUS
screen
MENU/SETP/EQUIP/INTELLIFLO
BACK
EXIT
PENTAIR IFLO VS 3050
IFLO VS 3050 #4
ASSIGN CUSTOM SPEEDS
INTELLIFLO STATUS
PRIMING PARAMETERS
SPA
IntelliFlo VS 3050 and IntelliFlo VSF+SVRS status screen description:
IntelliFlo VS 3050 #1:
Displays the IntelliFlo VF 3050 (VSF+SVRS) pump assignment number
RPM:
Displays the current flow rate for the pump in RPM. Note: For IntelliFlo VSF+SVRS pump, when in RPM mode
GPM = 0.
Watts:
To calculate a system’s “Continuous Watts” use the following formula:
Amps X Volts X Power Factor = Continuous Watts
- 1 HP E+ WhisperFlo = 7.4 amps X (230 Volt) X .90 PF = 1532 watts
- 1 HP Max – E – Pro = 8.0 amps X (230 Volt) X .87 PF = 1600 watts
Once watts are computed, convert watts to kilowatts (kilo is 1000) and multiply this number by kilowatt/hour cost.
- 1 watt = .01 Kilowatt
- 100 watts = .1 Kilowatt
- 1000 watts = 1 Kilowatt
- 1 HP E+ WhisperFlo 1532 watts or 1.532 Kilowatt x $.08 = $.122 per hour
- 1 HP Max-E-Pro 1600 watts or 1.600 Kilowatt x $.08 = $.128 per hour
The IntelliFlo does not require calculation for continuous watts since it is displayed on the screen in all modes. Just
simply take the watts published on the screen, convert to kilowatts, and multiply by the kilowatt hour. The formula is:
210 watts = .210 kilowatt X $.08 = $.016 per hour
Remember to also consider the amount of water moved for the cost incurred (Water to Wire Efficiency). The IntelliFlo
cannot be matched in today’s industry for flow versus continuous watts at any speed by any other pump in pool. The
Filter mode and flow control further assists in cost saving by always allowing the pump to do the least amount of work
at all times.
Communication Status:
Displays the pump communication and operating status.
BACK
EXIT
PENTAIR IFLO VSF+SVRS
IFLO VSF +SVRS #3
0 RPM 50 WATTS
STATUS NORMAL
30 GPM 50 WATTS
I
ntelliFlo VSF+SVRS status screen
IntelliFlo VS 3050 and VSF+SVRS Pump Setup
(Contin-
ued)
IntelliFlo VS 3050 and IntelliFlo VSF+SVRS Status Screen
From this screen you can view the IntelliFlo status screen for current real-
time pump operations. From this screen you can view the current speed
(RPM), power usage (WATTS), and communication status for the pump.
To access the IntelliFlo status screen:
1. From the main pump screen, press the left side button next
to the IntelliFlo pump that you wish view the status for.
2. On the next screen, press the left side button next to
INTELLIFLO STATUS to access the status screen.
This screen displays the selected IntelliFlo pump and address
Select the
IntelliFlo VS
3050 pump
to view
its current
status
MENU/SETP/EQUIP/IFLO/SELECT
BACK
EXIT
IFLO VS 3050 #2 SPA
NEXT GROUP OF PUMPS
IFLO VF 3050 #1 POOL
IFLO VS 3050 #4 AUX 3
IFLO VSF+SVRS #3
Summary of Contents for INTELLITOUCH
Page 9: ...vii IntelliTouch Control System User s Guide BlankPage...
Page 126: ...NOTES...
Page 127: ...NOTES SAVE THESE INSTRUCTIONS...
