IntelliTouch
®
Control System User’s Guide
34
Set the System Clock
It’s important to set the IntelliTouch system clock to the current time and date to ensure all automatic
pool functions to work correctly.
To set the system clock, go to the
Clock
screen.
1. Use the left or right side buttons to set each of the
clock settings.
2. Setting
Daylight Savings
:
Set to
Auto
if you are in an area that observes
Daylight Savings. Set to
Manual
if you are in an
area that does
not
observe Daylight Savings.
3.
Setting clock accuracy offset:
To change the clock
accuracy offset by seconds, press the right-side
button to increase the offset and the left-side button
to decrease the value. The offset value can be set
from -300 to +300 seconds. If the internal system
clock time is displaying ahead or behind the current time, use this the offset value to correct the clock.
4. Press the
Set
button to save the settings.
5. Press the
Exit
button to return to the main screen.
Assigning Circuit Names (for Display 1, 2, 3, and 4)
There can be up to four (4) Display screens that can be accessed, depending on the number of expansion
Load Centers or Power Centers (see page 27 for more information). Assigning the system circuit names
allows you to identify equipment from the Indoor Control Panel or MobileTouch wireless control
panel. There are almost 100 preset equipment names to choose from (see page 37) to identify pool,
spa and other related equipment. There are also 20 user-definable names to use for custom equipment
if the preset circuit names are not suitable. Customizing names can also help identify unique system
equipment. Assigning a custom circuit name to multiple circuits which then can be switched on or
off from one button on the Indoor Control Panel or MobileTouch control panel. This method is called
creating a MACRO (see page 80). For more information, refer to “Creating Custom Names for Auxiliary
Circuits,” page 38.
Note:
The top left and right circuit names (
SPA
and
POOL
) on the main
DISPLAY #1)
should not be
changed. These circuits have special reserved functionality that cannot be changed. The default circuits
may be given any name but always perform in the same manner. Be careful not to duplicate circuit
names with these circuits. These circuits may also be used to activate 2-speed pumps to high speed, turn
additional valves, etc.
A
SUN 12
MENU SETUP
CLOCK
Getting There
Summary of Contents for INTELLITOUCH
Page 9: ...vii IntelliTouch Control System User s Guide BlankPage...
Page 126: ...NOTES...
Page 127: ...NOTES SAVE THESE INSTRUCTIONS...
