52
9. Carefully aspirate with a vacuum cleaner the intake casing
J
of the fan boxes and, if it is the
version CLIMOS Comfort, you suck the PTC heating elements of the integrated defroster off with a
suitable suction nozzle.
Do not touch any parts of the defroster with your hands, and do not damage the
temperature sensor while cleaning!
Fig 53: Intake casing fan box
J
(2x)
10. After inspection, mount all parts in reverse order.
When installing the heat exchanger box, ensure correct locking with the fan boxes
by means of the tongue-and-groove joint!
Fig 54: Push direction of the fan boxes for locking with the heat exchanger box
11. Connect the cable for potential equalisation to the flat plug of the casing cover.
12. Close the casing cover by turning the 4 captive screws of the quarter turn locks by 90°.
13. Re-establish the mains connection.
J
Summary of Contents for CLIMOS F 200
