51
7. Pull out the heat exchanger box
G
in vertical position.
Fig 51: Removal of the heat exchanger box
G
8. Clean the internal heat exchanger
I
of the heat exchanger box
G,
if necessary.
Fig 52: Heat exchanger
I
in the heat exchanger box
G
In order to do so, proceed as follows:
•
Dip the heat exchanger into warm water several times (max. 40 °C).
•
Subsequently, thoroughly rinse the heat exchanger using warm tap water (max. 40°C).
As a general rule, do not use any aggressive or dissolvent detergents!
•
For drying, position the heat exchanger in such a way that existing residual water can run out of
the openings.
•
Let the heat exchanger run completely dry before reinstalling it.
Hints for proper cleaning can also be found at the manufacturer’s website.
G
I
G
Summary of Contents for CLIMOS F 200
