Paul CLIMOS F 200, Original Operating Instructions

Page: 29 / 68

29
Transport and packing 3.2.1
Proceed with care when transporting and unpacking the CLIMOS.
The packaging of the device may only be removed immediately before assembly! Prior to
and during assembly interruptions, the open air duct connection stubs must be protected
against ingress of construction dust and moisture!
Checking of the scope of delivery 3.2.2
If you detect any damages or incompletion to/of the delivered product, please contact the supplier
immediately. The scope of delivery includes:
•
HRU CLIMOS, check the type plate and make sure that it is the correct device version (Basic /
Comfort) and construction type right (type A) or left (type B).
•
230 V power cable with plug connection of a lower power device; length 2 m
•
CAT5 network cable; length 1.5 m
•
Adapter board
•
Casing adapter board made of transparent plastic
•
Control panel(s), type and quantity of order dependent;
•
Operating manual
•
4 mounting brackets
•
Set of design filter covers (optional)
Mounting 3.3
For the CLIMOS the following mounting positions are possible:
•
ceiling-hanging or lying (horizontally);
•
wall-mounted (horizontally or vertically);
•
inclined wall (horizontally or vertically).
The exhaust air connection must always be located at the top!
Mounting Preparations 3.3.1
At first, mount at the long sides of the CLIMOS 2 pieces of the provided mounting brackets each with 4
cross-head screw each.
Fig 16: Mounting brackets
At first, check the necessary load capacity of the respective fixing surface (own weight of the CLIMOS is
25 kg) and the secure fixing possibility using the mounting brackets. If the fixing is made at a wooden or
lightweight construction, we recommend the die insertion of a vibration-damping distance washer for each
mounting bracket.