38
5. Loosen the 2 locking screws
D
of the control system casing by approx. 4 - 6 mm by turning them
counter clockwise and remove the cable for potential equalisation from the flat plug of the control
system casing.
Fig 35: Screws
D
for fastening the control system casing
6. Push the control system casing in the direction of the arrow by approx. 3 - 5 mm in such a way that
the press-in keyhole fasteners unlatch from the 4 keyholes
F
of the casing wall.
Fig 36: Unlocking the keyhole connection
7. Withdraw the control system casing step by step as indicated by the arrows.
Fig 37: Removal of the control system casing in direction heat exchanger
D
F
1.
Summary of Contents for CLIMOS F 200
