Paul CLIMOS F 200, Original Operating Instructions

Page: 12 / 68

12
LED L8
LED L11
LED L10
LED L12
LED L9
LED L1 … L7
2.2.1.2 Signalling of operating and error conditions
LED signalling Function / meaning
LED lamp display
L1 ... L7
No LED
ԑ
fan speed 0 (fan off, standby)
1 LED (L1)
ԑ
fan speed 1
2 LEDs (L1 + L2)
ԑ
fan speed 2
... etc.
7 LEDs (L1 + L2 + … + L7)
ԑ
fan speed 7
L1 + L7 are lit No external release: fan off
L8 is lit Supply and extract air mode
L8 blinks Error sensor: Fans are switched off
L8 flashes Standby mode active
L8 + L10 blink Configuration mode for temperature threshold summer ventilation (display
only during the configuration phase)
L8 + L11 + L12 blink General error, the error number is displayed in a binary form by means of
the LEDs L1 to L7 (see Tab. 38 in section 3.8.1)
L8 + L12 are lit + L11 blinks
2x and then remains off Configuration mode for joint operation with heat-producing appliance
(display only during the configuration phase)
L9 is lit Boost ventilation mode (L1 + L2 + L3 + L4 + L5 + L6 + L7 blink)
L10 is lit Filter run-time has expired
L10 flashes The remaining filter run-time is 10 days
L10 + L12 blink Configuration mode balancing for the selected fan speed
(display only during the configuration phase)
L11 is lit Extract air mode
L11 blinks Error fan 1 Hall: Fans are switched off
L11 blinks briefly 3x Extract air mode deactivated (key Extract air mode locked, configuration
for joint operation with heat-producing appliance active)
L12 is lit Supply air mode
L12 blinks Error fan 2 Hall: Fans are switched off
Tab. 3: : Assignment of functions of the LED signalling
Fig 4 : LED signalling of the LED control panel