Paul CLIMOS F 200, Original Operating Instructions

Page: 2 / 68

Version: 2.0_06/2016 EN
Preamble
Thank you for deciding on the heat recovery unit CLIMOS F 200 .
Legal provisions
All rights reserved.
This operating manual has been compiled with the greatest care. However, the editor does not assume
any liability for damages resulting from missing or incorrect information contained in this operating
manual. We reserve the right to change the content of this manual partially or completely at any time
without prior notification.
The information contained in these documents is the property of PAUL Wärmerückgewinnung GmbH.
The publication, whether partially or completely, requires the written consent of PAUL
Wärmerückgewinnung GmbH. Any in-house reproduction intended to evaluate the product or for proper
use is permitted and is not subject to approval.
Trademarks
All trademarks are acknowledged, even if they are not labelled separately. A missing labelling does not
mean that a good or sign is free of trademark rights.
© 2014 PAUL Wärmerückgewinnung GmbH. All rights reserved.
Validity
This document applies to the following types of devices:
•
CLIMOS F Basic – series (Zehnder Climos 200 Enthalpy – series)
•
CLIMOS Comfort – series (Zehnder Climos 200 V Enthalpie – series)
The design versions CLIMOS F 200 Basic and CLIMOS F 200 Comfort are hereinafter referred to under
the product name CLIMOS unless details are for distinguishing device.
The heat recovery unit (HRU) CLIMOS has been built according to the current state of the art and the
acknowledged rules on safety. The device is subject to permanent improvement and development.
Therefore, your device may differ slightly from the instructions.
In order to guarantee a safe, appropriate and economic operation of the heat recovery unit CLIMOS,
please observe and comply with all information and notes on safety in this operating manual.
Subject of this operating manual is the heat recovery unit CLIMOS in different design variants. Possible
accessories are only described insofar as it is necessary for the appropriate operation. Please see the
particular manuals for further information on accessories.
Target group
The operating manual is intended for operators and qualified personnel. The activities may only be
carried out by personnel having a corresponding formation and being sufficiently qualified for the
respective work.
Besides the general section 1 Introduction, this manual consists of:
•
A part for the operator and qualified personnel
→
section 1 and 2
•
A part specifically intended for qualified personnel
→
section 1 and 3