7. Welding operation
WMD078TE0PAA07
67
2) Specifying welding current and voltage
preset values.
<Control process and settable items>
<Adjustment range of
welding current/voltage preset values>
<Adjustment range of Arc spot time>
0.3-10.0 [0.1] (Unit: second)
Control process INITIAL MAIN
CRATER
NO CRATER
ー
○
ー
CRATER
ー
○
○
INI.&CRATER
○
○
○
ARC SPOT
ー
○
ー
*O: Settable item
Item
Adjustable range [Increment]
Current (A)
Voltage (V)
INITIAL
30 to 400 [2]
12.0 to 38.0 [0.2]
MAIN
30 to 400 [2]
12.0 to 38.0 [0.2]
CRATER
30 to 400 [2]
12.0 to 38.0 [0.2]
Display1
Panasonic
VP1 series
Display2
Dial1
Dial2
ENTER button
Press the button corresponding to the lighted LED.
→
When the button is pressed, the lighted LED
turns blinking.
* The item is settable while LED is blinking.
< Note >
At that time, the selected item is indicated
on the first line of LCD in the upper right of
the operation panel indicates.
Use Dial1 to specify a current preset value.
Use Dial2 to specify a voltage preset value.
Press the button corresponding to the blinking
LED to save the change.
→
The blinking LED turns solid.
* The item is not settable when LED is lit solid.
Note
Pressing a button updates the current value as
set value.
Do not press any button carelessly.
(Example: Control process
is “CRATER”
LEDs for MAIN and CRATER are lit.
(Main and crater welding set values are settable.)
→
Press MAIN button, then LED for MAIN blinks.
A
CURRENT
m/mom
WIRE-FEED
mm
THICKNESS
V
VOLTAGE
±V
UNITARY
S
Time
INITIAL
MAIN
CERARER
CONTROL
ARC SPOT
ENTER
LOCK
(HOLD)
SPEED
INITIAL
MAIN
CRATER
CONTROL
ARC SPOT
(Example: To change set value of MAIN welding)
Blink
