8. Various settings
WMD078TE0PAA07
92
→
Display “00” (submenu No.) on
the remaining columns of Dis-
play1.
→
The contents of the specified
submenu is indicated on LCD.
3.
Specify a submenu.
Turn Dial1 to display a desired
submenu No. (00 to 99).
* Check with submenu No. on
Display1 and/or its contents on
LCD.
* For menu Nos. not in use:
Those menu numbers are indi-
cated on Display1 with “- - - -”
on LCD as they have no
contents.
(Example: Specify submenu “00”
with “
Run-in Speed
”.
Press ENTER button.
→
The standard value is indicated
on the second line of LCD.
→
The current set value is indi-
cated on Display2.
* If the current set value is the
standard value, the value on
Display2 blinks. If not, the
value lights solidly.
4
Change the set value of the submenu.
Turn Dial2 until the desired set
value of the submenu is displayed
on Display2.
(Example: Set “1”.)
Press ENTER button.
→
Display2 is cleared.
→
Display1 becomes selectable.
5
．
To edit other submenus of the mode.
Repeat the previous procedures 3 (Specify a submenu) and 4 (Change the set value of the sub-
menu) for each submenu you want to edit.
(See section “
82.)
Submenu number
RUN-IN SPEED
Contents of
the submenu No.
on Display1
～
～
RUN-IN SPEED
RUN-IN SPEED
HOT VOLTAGE
CRAT SKIP TIME
Current set value
“0” is the standard value
⇒
Blinking
RUN-IN SPEED
STANDARD VALUE
:
0
Standard value
RUN-IN SPEED
STANDARD VALUE
:
0
RUN-IN SPEED
