Panasonic YD-400VP1YHD, Operating Instructions Manual

Page: 24 / 154

5. Names and functions
WMD078TE0PAA07
24
No. Name Functions
Output/Setting dis-
play1
When Mode indicator ( ) “RECORD” (see page 117 page) is lit:
• Immediately after switching to RECORD mode, or when oFF is
selected using Dial 2 (
), it indicates the current set value and “- - -”
alternately.
• After selecting a channel using Dial 2 ( ), it indicates the current
set value and “CH-” alternately.
• Select a channel and press ENTER ( ), then it indicates “ rEC ”.
Then, select RECORD no, yES or dEL.
• Select “ yES ” to enter a channel name. At that time, the display indi -
cates “rEC”.
While holding down INCHING button ( ), and
when Mode indicator ( ) “WELD NAVI. ”, “DETAIL” or “RECORD” is
selected, the display indicates “no”. At that time, Output/Setting dis -
play 2 ( ) indicates “Act” (put two displays together, they indicate
“no act”) and the inching operation is disabled.
In case a self diagnosable error occurs:
• The “ Err ” blinks on the display. At that time, the error number that
indicates the error contents blinks on Output/Setting display 2 ( ).
Output/Setting dis-
play1 select button Use it to select current, wire feed speed or thickness.
Press the button until the LED of the intended Output/Setting display
1 item indicator (
) is lit. Then the set value of the selected item is
indicated on the Output/Setting display 1 ( ).
Output/Setting dis-
play1
item indicator
When Mode indicator ( ) “WELD”, “CALL” or “RECORD” is lit.
(See pages 120 and 117):
• The LED of Output/Setting display 1 item indicator ( ) selected by
Output/Setting display 1 select button ( ) is lit.
When Mode indicator ( ) “WELD NAVI. ” or “DETAIL” is lit.
(See page 77 and 82):
• LED is turned off.
1 4
2
1
2 5
8 9 10
29
22
3
3
15
13
1
22
15
15
13
29
22
4
4
2
A
m/
分
mm
3
1
3
A
CURRENT
m/min
WIRE FEED
mm
THICKNESS
SPEED
22
3
2
22