Panasonic YD-400VP1YHD, Operating Instructions Manual

Page: 31 / 154

5. Names and functions
WMD078TE0PAA07
31
No. Name Functions
Dial 2
(For Output/Setting
display2) Use it to change the value displayed on the Output/Setting display2
(
).
When Mode indicator ( ) “WELD” is lit:
• Use it to specify the set value of the item (voltage, voltage adjusting
value based on unitary condition, or arc spot time (only when the arc
spot is set)) selected by Output/Setting display2 select button (
)
in Initial ( ), Main ( ) or Crater ( ) welding operation.
• If “ANALOG RC” setting is set to “With the remote controller”, use
the remote controller to set the system (see section “ 8.6 Group3:
SYSTEM settings ” on page 104.)
• The setting is changeable while welding.
When Mode indicator ( ) “WELD NAVI. ”(see page 77) is lit:
• Use it to set the joint shape, wire-feed speed and thickness.
When Mode indicator ( ) “DETAIL” (see page 82) is lit:
• Use it to specify the set value of the selected item.
When Mode indicator ( ) “CALL” (see page 120) is lit:
• Use it to select the channel number to call.
(Only recorded channel numbers are indicated on Output/Settings
indicator 2 (
).
When Mode indicator ( ) “RECORD” (see page 117) is lit:
• Use it to select a channel and then select the intended action (no)
for do not record, (yES) for record, or (dEL) for delete.
• Use it to select a channel number.
When Settings indicator ( ) “WAVE CONTROL” or “WIRE-FEED
ADJUST” is lit:
•
Use it to adjust the set value of WAVE CONTROL or WIRE-FEED
ADJUST.
When Settings indicator ( ) “DIRECT” (see page 126) is lit:
• Use it to select a submenu number while changing an item in
DIRECT function.
• Use it to adjust a set value while using DIRECT function.
15
22 24
15
2
8 9 10
5
4
15
2
22
5
8 9 10
22
22
22
4
22
24
24