5. Names and functions
WMD078TE0PAA07
23
5.4 Operation panel
No.
Name
Functions
Output/Setting dis-
play1
When Mode indicator (
) “WELD” is lit:
•
It indicates the set value (current, wire feed speed or thickness) of
the item selected by Output/Setting display1 select button (
) in
Initial (
), Main (
) or Crater (
) welding operation.
•
While welding, it indicates output current.
•
After completing welding operation, the last output value blinks on
the display.
• If there is no welding table, the displays indicate “- - -”.
When Mode indicator (
) “WELD
NAVI.
77) is lit:
• It shows “- - -”.
When Mode indicator (
) “DETAIL” (see page
82) is lit:
•
It indicates setting group number and setting submenu.
At that time, Output/Setting display 2 (
) indicates its set value.
When Mode indicator (
120) is lit:
•
Immediately after switching to CALL mode, or when oFF is selected
using Dial 2 (
), it indicates the current set current and “- - -” alter
-
nately. At that time, it is possible to perform welding operation
using the current welding condition.
•
After selecting a channel using Dial 2 (
), it indicates the called cur-
rent value and “CH-” alternately.
•
While welding, it indicates the output current.
•
After completing welding operation, the last output value blinks on
the display.
1
1
8
9
10
22
4
15
13
2
1
A
CURRENT
m/min
WIRE FEED
22
2
8
9
10
22
22
4
22
15
15
