5. Names and functions
WMD078TE0PAA07
25
No.
Name
Functions
Output/Setting dis-
play2
When Mode indicator (
) “WELD” is lit:
•
It indicates the set value of the item (voltage, adjusting value based
on unitary condition, or arc spot time (only when the arc spot is set))
selected by Output/Setting display2 select button (
) in Initial
(
), Main (
) or Crater (
) welding operation.
•
While welding, it indicates the output voltage.
•
After completing welding operation, the last output value blinks on
the display.
•
If there is no welding table, the displays indicate
“- - -”
When Mode indicator (
) WELD NAVI.
77) is lit:
Conditions of joint shape, thickness and welding speed are indicated.
It also indicates “rEt” to move to the previous item.
When Mode indicator (
) “DETAIL” (see page
82) is lit:
It indicates the set value of the selected item.
At that time, Output/Setting display 1 (
) indicates setting group
number and setting submenu.
When Mode indicator (
120) is lit:
•
Immediately after switching to CALL mode, or when oFF is selected
using Dial 2 (
), it indicates the current set voltage and “- - -” alter
-
nately. At that time, it is possible to perform welding operation
using the current welding condition.
•
After selecting a channel using Dial 2 (
), it indicates the called
voltage value and “CH-” alternately.
•
While welding, it indicates the output current.
•
After completing welding operation, the last output value blinks on
the display.
1
4
15
13
22
4
8
9
10
5
4
V
VOLTAGE
±V
UNITARY
22
5
8
9
10
22
22
1
22
15
15
