Panasonic WJ-SX 150A, Operating Instructions Manual

Page: 153 / 220

157 157
Transmission command toggles zoom.
mm=Monitor No.
n=0 Zoom OFF
n=1 + mark display ON*
n=2 Two-fold zoom
n=4 x4Live image/Playback image
n=8 x8Live image/Playback image
*Available only with the Multiplexer board
CMD:RmmZM
Multiscreen segment switch-
ing
Recorder Control
Item
Transmission Command
(ASCII)
Response (ASCII) Parameter (ASCII)
CMD:RmmML ANS:RmmML mm=Monitor No.
Electronic Zoom ANS:RmmZMn
Play CMD:RmmPL ANS:RmmPL mm=Monitor No.
Pause CMD:RmmPA ANS:RmmPA mm=Monitor No.
Stop CMD:RmmSPn ANS:RmmSPn mm=Monitor No.
n=0 Stop playback
n=1 Stop recording
Recorder button CMD:HmmRSnn ANS:HmmRSnn nn=00 Master recorder selected
nn=01 Slave 1 recorder selected
nn=02 Slave 2 recorder selected
nn=03 Slave 3 recorder selected
nn=04 Slave 4 recorder selected
nn=99 Recorder mode cancelled
When nn is not entered, the Master recorder
is selected.
Live/Playback image CMD:RmmVS ANS:RmmVSn Necessary when using a non-Panasonic
recorder with the Multiplexer board.
Transmission command changes the monitor
display between live and playback image.
n=0 Live image
n=1 Playback image