manualshive.com logo in svg

Panasonic WJ-SX 150A, Operating Instructions Manual

The Panasonic WJ-SX 150A, a superior security system, offers advanced features for optimal performance. Ensure effortless operation with the comprehensive Operating Instructions Manual available for free download from manualshive.com. Take control of the product and maximize its potential, easily accessing the manual anytime, anywhere.

Share
Download
background image

42

WJ-HD300 SERIES CONTROL (WV-CU360C/CJ TERMINAL MODE)

• Available operations are in common with WJ-HD500

Series. (Refer to this unit’s operating instructions.)
This document describes operations applicable to WJ-
HD300 Series only.

• You cannot control the following functions from System

Controller WV-CU360C and WV-CU360CJ. (It is recom-
mended to use System Controller WV-CU650.)

• A – B repeat playback
• GO TO LAST
• Filtering ON/OFF
• MARK
• Text display ON/OFF
• Disk selection
• System functions

■ 

Controlling Digital Disk
Recorder WJ-HD300 Series

●

Search Playback

You can search playback images using the ALARM
RECALL table or the SEARCH table. 

Every time you press the INDEX button, the display will
change as follows.
Live image 

→

Date-and-time entry form

→

Recording event

list 

→

VMD search list 

→

Marking list 

→

Date-and-time

entry form...

• Date-and-time Search Playback

The recorded images can be searched for through the date
and time.

1. Enter the recorder mode. (Refer to the unit's operating

instructions.)

2. Press the INDEX button. The date-and-time entry form

will appear on the monitor.

Note:

The factory default setting is the current date and

time.

3. Press the NEXT or PREV button to enter the desired

date and time. The cursor can be adjusted by moving
the joystick rightward or leftward.

Note: 

To exit the entry form, press the MON (ESC) but-

ton. 

4. Press the PLAY or CAM (SET) button. After the search

through the date and time, the recorded image will be
played.

• Recording event search

You will select a searching filter from "TIME&DATE", "CAM-
ERA", "REC EVENT", and "TEXT". Playback pictures will be
searched by the selected searching filter. 

1. Enter the recorder mode. (Refer to the unit's operating

instructions.)

2. Repeat pressing the INDEX button until the recording

event list window is displayed on the monitor. 
The recorder will enter the searching mode.

Note:

• To change the monitor display to the thumbnail,

press the F1 button. (Refer to the operating instruc-
tions of recorder for details on monitor display.)

• You can display neither the text information nor

DATA COPY window.

3. Select a desired searching filter by moving the joystick

rightward or leftward.

Note: 

The illustration is an example in which "CAMERA"

has been selected for the searching  filter.

TIME&DATE    SEARCH    REC EVENT     SEARCH    VMD    SEARCH    MARK

START

.

.

:

:

FEB

2

04

12

00

00

AM

UP

L

R

DOWN

TIME&DATE

01ch
01ch
01ch
01ch
01ch
01ch
01ch
01ch

MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL

CAM

REC EVT

ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP

TEXT

APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM

TIME&DATE    SEARCH    REC EVENT    SEARCH    VMD    SEARCH    MARK

TIME&DATE

CAMERA

REC EVENT

TEXT

UNLOCK FILTER

TOTAL

APR.25.03*12:34:56 AM 

APR.25.03*12:34:56 AM

100

TIME&DATE

01ch
01ch
01ch
01ch
01ch
01ch
01ch
01ch

MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL

CAM

REC EVT

ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP

TEXT

APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM
APR.25.03*12:34:56 AM

TIME&DATE    SEARCH    REC EVENT    SEARCH    VMD    SEARCH    MARK

TIME&DATE

CAMERA

REC EVENT

TEXT

UNLOCK FILTER

TOTAL

APR.25.03*12:34:56 AM 

APR.25.03*12:34:56 AM

100

Summary of Contents for WJ-SX 150A





























































































































































































































Reviews:

No comments

Related manuals for WJ-SX 150A

Panasonic WJSX150 - SWITCHER - ADDENDUM Addendum preview
WJSX150 - SWITCHER - ADDENDUM
Brand: Panasonic Pages: 48
N-Tron NT24k User Manual preview
NT24k
Brand: N-Tron Pages: 132
Imtex-Controls SLR Series Installation & Adjusting Instructions preview
SLR Series
Brand: Imtex-Controls Pages: 2
A-Neuvideo ANI-H-KIT Instruction Manual preview
ANI-H-KIT
Brand: A-Neuvideo Pages: 28
GarrettCom DS60s Installation And User Manual preview
DS60s
Brand: GarrettCom Pages: 39
Black Box ServSwitch KV1510A User Manual preview
ServSwitch KV1510A
Brand: Black Box Pages: 16
Belkin 24-Port Gigabit Switch Specifications preview
24-Port Gigabit Switch
Brand: Belkin Pages: 2
QSFPTEK S7300-48X2Q4C Quick Start Manual preview
S7300-48X2Q4C
Brand: QSFPTEK Pages: 12
TRENDnet TK-407K - KVM Switch - USB Specifications preview
TK-407K - KVM Switch - USB
Brand: TRENDnet Pages: 2
HighSecLabs K304 Quick Start Manual preview
K304
Brand: HighSecLabs Pages: 2
TLS Electronics 875300 User Manual preview
875300
Brand: TLS Electronics Pages: 12
Hama 42556 Operating Instructions Manual preview
42556
Brand: Hama Pages: 36
JenLogix Palert PX-01 Series User Manual preview
Palert PX-01 Series
Brand: JenLogix Pages: 48
Grasslin Plug in Digital Time Switch Instruction Manual preview
Plug in Digital Time Switch
Brand: Grasslin Pages: 88
Copal 102R Instruction Manual preview
102R
Brand: Copal Pages: 9
IN-COMMAND NCSTS9 Installation And Operation Manual preview
NCSTS9
Brand: IN-COMMAND Pages: 8
Myson Touch 2 WiFi Leaflet preview
Touch 2 WiFi
Brand: Myson Pages: 2
Avenview SW-HDM3D-C5-8X8 User Manual preview
SW-HDM3D-C5-8X8
Brand: Avenview Pages: 20

Brands by name

Popular brands

Load more brands