76
• RS485 CAMERA
This menu links to the submenu.
Move the cursor and press the CAM (SET) button to go into
the menu. 750 RS485 CAMERA will appear on the monitor.
SWITCHER:
Select a unit (SLAVE1 to 4 and MASTER*)
to configure the parameters.
* In normal connection, only MASTER is displayed.
CAM:
This stands for a camera channel of the unit.
LCN:
This stands for a logical camera number.
PORT:
This stands for a port which connects the cam-
era.
RS485:
Select this when the camera is connected
to the RS-485 camera port.
DATA1/2/3:
Select this when the camera is con-
nected to the DATA 1/2/3 port.
You can select the parameters only for the ports whose
mode is set to “CAMERA” in 740 CAMERA/DATA1-4 PORT.
(Refer to pp.74 and 75.) If the mode is set to others, a
space will be displayed for PORT.
Notes:
• If five (Master and Slave 1 to 4) units are connected in
the system, you can configure no parameters for MAS-
TER.
• If the mode is changed to “TERMINAL-K1/2/3/4” in 740
CAMERA/DATA1-4 PORT, the PORT parameters will be
deactivated even after set to RS485 or DATA1/2/3.
• CAMERA CLEANING
ON:
Activates the manual cleaning for the cameras.
OFF:
Deactivates the manual cleaning.
When you set CAMERA CLEANING to ON and exit from the
SETUP MENU, camera cleaning will start.
The factory default setting is OFF.
Notes:
• When the camera cleaning is active, cleaning will begin
from CAM 1 in numerical order.
• Surveillance is impossible during the cleaning.
• The cleaning cannot be stopped after it is started.
• Refer to pp. 37 and 38 for details on RS-485 connec-
tions.
• The camera address needs to be corresponding with
the camera number.
■
OPERATOR REGISTRATION
●
How to Display
To display this menu on the monitor, move the cursor to
800 OPERATOR REGISTRATION in SETUP MENU by mov-
ing the joystick to
▼
.Then, press the CAM (SET) button. The
submenu appears on the monitor.
●
Parameters
Move the joystick to move the cursor.
Press the NEXT or PREV button to select the desired para-
meters.
Press the numeric button(s) to enter a number.
• OPERATOR NO.
This stands for an operator number. When you enter the
number by pressing the NEXT, PREV or numeric button(s),
this menu will display the associated operator's information.
1 to 16 is available.
• ID
This stands for an operator ID. 1 to 99999 is available.
• PASSWORD
This stands for an operator's password. 1 to 99999 is avail-
able. The password will be displayed as "
∗∗∗∗∗
" on the
monitor.
• PRIORITY
This stands for an operator's priority. 1 to 16 is available.
(Refer to p. 15 for details on Priority Lock.)
• LEVEL
This stands for an operator's restrict level. It is configurable
through Level Table (refer to p. 91) of WJ-SX150A
Administrator Console what kind of restriction is given to the
operator. 1 to 3 is available.
SWITCHER:
Select a unit (SLAVE1 to 4 and MASTER*)
to configure the parameters.
* In normal connection, only MASTER is displayed.
CAM:
This stands for a camera channel of the unit.
LCN:
This stands for a logical camera number. 1 to 99
is selectable.
750 RS485 CAMERA
SWITCHER=SLAVE1(1 of 5)
CAM LCN PORT CAM LCN PORT
1 21 9 51
2 22 10 52
3 23 11 53
4 24 12 54
5 25 13 55
6 26 14 56
7 27 15 57
8 28 16 58
LCN:LOGICAL CAMERA NUMBER
800 OPERATOR REGISTRATION
OPERATOR NO.=1
ID =150 PRIORITY= 1
PASSWORD =
∗∗∗∗∗
LEVEL = 1
SWITCHER=SLAVE(1 of 5)
CAM LCN CAM LCN
1 21 VIEW&CONTROL 9 51 VIEW&CONTROL
2 22 VIEW ONLY 10 52 VIEW&CONTROL
3 23 VIEW&CONTROL 11 53 VIEW ONLY
4 24 VIEW ONLY 12 54 VIEW&CONTROL
5 25 VIEW&CONTROL 13 55 VIEW&CONTROL
6 26 VIEW&CONTROL 14 56 VIEW&CONTROL
7 27 VIEW&CONTROL 15 57 PROHIBITED
8 28 VIEW&CONTROL 16 58 PROHIBITED
Summary of Contents for WJ-SX 150A
