7
Operating Instructions
Usage
Usage
Included Accessories
Check that the following item is included with your up/down wall kit or up/down stand kit.
•
Operating Instructions - - - 1
Names and Uses of the Parts
∫
When using with the stand
∫
When mounting onto a wall
!1"
Projector Arm
The projector is mounted on this pipe which, when the elite Panaboard is moved
using the stand, can be turned clockwise or counterclockwise until the arm is made
parallel with the screen.
!2"
Projector Bracket
This is used to mount the projectors made by several companies. The actual
projector mounting is carried out by the service engineer so consult the engineer
concerning the mounting of the projector.
!3"
elite Panaboard
The elite Panaboard can be installed on the stand or on the wall.
(model UB-T780, UB-T781, UB-T781W, UB-T880 or UB-T880W)
!4"
Safety Brake
This can be applied to ensure that the elite Panaboard will not move up or down.
!5"
Pin End Stoppers
These are put into place at some point along the up/down moving range to ensure that the
projector will not suddenly drop down to a lower position. Before lowering the projector to
its lowest position and, with the pin end stoppers pushed in, lower the up/down frame.
!6"
Foot Reinforcing
Assemblies (Only
when the stand is
used)
When using the system with the stand, make sure that the foot reinforcing
assemblies are installed to prevent the system from toppling over. Before moving
the stand, be absolutely sure to remove the foot reinforcing assemblies from the
stand base.
!7"
Casters (Only when
the stand is used)
Further movement of the stand can be prevented by locking the rear casters.
!8"
Table Plate (Only when
the stand is used)
The equipment (such as a notebook computer) to be used along with the elite
Panaboard can be placed on the table plate.
!2"
!2"
!3"
!3"
!4"
!4"
!4"
!5"
!1"
!7"
!8"
!7"
!6"
Rear View
UE-608030_EN.book 7 ページ ２０１０年１０月２８日 木曜日 午後４時２０分
