Wall Mounting Construction
25
Installation Manual
Notice
•
When mounting a projector other than a SANYO
model onto the projector bracket, mount it with the
adjustment feet on the bottom of the projector
retracted.
•
Follow the steps below to mount a SANYO model.
1
Extend the two adjustment feet by pulling them
out.
2
Pass the adjustment feet through hole A in the
projector bracket.
3
Move the projector bracket, move the adjustment
feet of the projector to the positions shown in the
figure below, then align the positions of the
spacers with the holes for fastening the projector,
and use the screws to fasten the projector.
4
Retract the adjustment feet.
1
Secure the spacers (
A
) and bushings (
B
) used
to secure the projector through the holes to be
used for the projector model concerned on the
projector bracket in such a way that the
bracket is sandwiched between the spacers
and bushings.
•
The spacers (
A
) used to secure the projector
are secured in the holes whose positions are
indicated by the initial of the projector brand.
2
Align the attached spacers with the holes used
to suspend the bottom panel of the projector,
and secure them using the screws (
C
)* for
securing the projector.
* For an Acer projector, use the screws (
I
) for
securing the projector (for Acer) instead.
Adjustment Feet
Screw Fastening Positions
Hole A
Initial
Projector model name
No. of
spacers
“P”
Panasonic
PT-ST10
3
“S”
SANYO
LP-WXL46(S)
5
“E”
EPSON
EB-410W
5
“O”
Optoma
EX525ST
4
“A”
Acer
S1200
3
“B”
BenQ
MP772ST
MP776ST
MP782ST
3
Bushing for Securing
Projector (
B
)
Spacer for Securing
Projector (
A
)
Screw for Securing
Projector (
C
)*
Bushing for Securing
Projector (
B
)
Spacer for Securing
Projector (
A
)
UE-608030_EN.book 25 ページ ２０１０年１０月２８日 木曜日 午後４時２０分
