Wall Mounting Construction
33
Installation Manual
Mounting the elite
Panaboard
1
Align the wall mount holes on the bottom of the
board attachments with the left and right
positions of the board bottom bracket (loosely
secured to the up/down unit) and secure them
tightly using the board mounting screws (
5
,
two on each side).
For UB-T880
2
Try drawing the elite Panaboard toward you,
and check that the elite Panaboard is fastened
securely to the up/down unit.
•
Confirm that the elite Panaboard is securely
attached and does not move freely back and
forth.
Checking the Up/Down
Operations
•
Confirm that the up/down part can easily be lifted
higher than the pin end stopper.
•
Confirm that the up/down part does not drop more
than 20 cm (7
7
/
8
in.) of its own accord when
released from the highest point.
At this stage, check up/down operations, and if they
are not balanced, remove the elite Panaboard and
readjust the up/down unit.
•
Check that none of the cables are stretched to their
full length or sandwiched when the up/down
operations are performed.
Lower Frame Cover
Board Mounting Screws (
5
)
UE-608030_EN.book 33 ページ ２０１０年１０月２８日 木曜日 午後４時２０分
