Wall Mounting Construction
24
Installation Manual
Mounting and Securing
the Up/Down Unit
1
Hang the up/down unit on the wall again.
2
Take the steps below to secure the up/down unit.
1
Pass one M8 bolt through the bottom hole in
the stay L75 pipe on the left, and use it to
secure the up/down unit.
2
Pass another M8 bolt through the bottom
hole in the stay drum 75 pipe on the right,
and use it to secure the up/down unit.
3
Tighten the M8 bolts in the top holes of the
left and right pipes, and fasten the up/down
unit securely to the wall.
After mounting the up/down unit on the wall, pull the
unit toward you, and check that the wall-mounting
bolts are fastened completely.
Notice
•
To ensure safety, do this work with another individual
without fail.
Preparing to Mount the
Projector
Shown below are the projector models which can be
secured to the projector bracket.
Use the spacers, bushings and screws at the positions
shown for each model, and fasten the projector
securely.
(Projector models supported as of May 2010)
Bolts
Bolts
Stay L75
Pipe
Stay Drum
75 Pipe
Panasonic PT-ST10
SANYO LP-WXL46(S)
EPSON EB-410W
Optoma EX525ST
BenQ
MP772ST
MP776ST
MP782ST
Acer S1200
UE-608030_EN.book 24 ページ ２０１０年１０月２８日 木曜日 午後４時２０分
