Wall Mounting Construction
32
Installation Manual
10
Turn the head of the M6 189 screw with a 10 mm
(
13
/
32
in.) wrench (ratchet type) and reposition the
hold tube assembly to the adjustment position
for the model to be mounted (
4
).
(Example: When mounting a UB-T880W, turn the M6 189
screw clockwise with a 10 mm [
13
/
32
in.] wrench [ratchet
type] and reposition the assembly from adjustment
position 7 [as shipped] to adjustment position 9.)
Note
•
When the hold tube assembly is moved toward
the “+” side of the arm 450, the load which can
be supported by the arm assembly is increased.
(When the UB-T880W is installed)
•
Conversely, when the hold tube assembly is moved toward
the “–” side of the arm 450, the load which can be
supported by the arm assembly is reduced. (When the
UB-T781, UB-T781W, UB-T780 or UB-T780BP is installed)
11
Holding nut B in place with a 10 mm (
13
/
32
in.)
wrench, use another wrench to loosen nut A
(counterclockwise,
5
).
12
Holding nut B in place with a 10 mm (
13
/
32
in.)
wrench, use another wrench to turn the M6 189
screw counterclockwise. Tighten the screw
until nut B is secure (
6
).
13
Holding nut B in place with a 10 mm (
13
/
32
in.)
wrench, use another wrench to turn nut A
clockwise, and then tighten nuts A and B (
7
).
14
Mount the elite Panaboard on the up/down unit
again.
M6 189 Screw
“–” side
“+” side
Hold Tube
Assembly
“+” side
“–” side
10 mm (
13
/
32
in.)
wrench (ratchet type)
Arm 450
Nut A
Nut B
5
Nut B
6
M6 189 Screw
7
Nut B
Nut A
UE-608030_EN.book 32 ページ ２０１０年１０月２８日 木曜日 午後４時２０分
