background image

Sanus Systems

  2221 Hwy 36 West, Saint Paul, MN  55113  USA

Customer Service: 1-800-359-5520 • 651-484-7988

[email protected] • www.accents.sanus.com 

©2008 Milestone AV Technologies. All rights reserved. Sanus Accents is a Milestone Brand. Sanus and Sanus Systems 

are registered trademarks, and Sanus Accents and the Sanus Accents logo are trademarks of Milestone.

All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

SAN213

(6904-100136 <00>)

Thank you for choosing an Accents wall mount. The SAN213 is designed to mount monitors with VESA 75x75, 100x100, 
or 200x100 hole patterns, weighing less than 45 lbs (20.5 kg) to a vertical wall; it is also adjustable, allowing ±15° of tilt. 

Do not use this product for any purpose not explicitly specifi ed by Accents. Improper assembly may cause 
property damage or personal injury. If you do not understand these directions, or have doubts about the safety 
of the assembly, contact Customer Service or call a qualifi ed contractor. Accents is not responsible for damage or 
injury caused by incorrect assembly or use.

 CAUTION

This product contains small items that could be a choking hazard if swallowed.  Keep these items away 
from young children!

 WARNING

OPT

Hardware and procedures for multiple mounting configurations are included. When you see this symbol, 
choose the correct configuration to suit your needs. Not all hardware included will be used.

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

The wall must be capable of supporting up to five times the weight of the monitor and mount combined. If you 
have any doubts about the ability of the wall to support the monitor, contact Customer Service, or a qualified 
contractor.

 CAUTION

Summary of Contents for SAN213










Reviews: