Assembling the Stands
37
Installation Manual
Assembling the Stands
Assembling the Stands
Assembling the Stand Table Unit
1
Take the left stand and right stand out of the
stand unit box, and use the three bolts and
collars for each stand to secure the stands.
•
As shown below, with the bottom of the up/down unit
taken out of the packing box, remove the up/down unit’s
three bolts and collars each for the left and for the right.
(Spread cushioning material under the up/down unit to
adjust the height.)
* The bolts and collars which have been removed are not used.
•
Loosely secure the left stand and right stand to
the up/down unit using the bolts (
8
) for securing
the left and right stands provided, the flat washers
and spring washers which were removed, and the
collars (
9
) for securing the left and right stands.
Notice
•
Mount the stands with the sides provided with
the locking casters pointed upward.
2
Tighten bolts A.
•
Use a 4 mm (
5
/
32
in.) allen key to tighten bolts A,
and secure the stand part and the up/down unit.
Right Stand
Left Stand
Up/Down Unit
Packing Box
Flat Washer
Bolt
*
Collar*
Spring
Washer
Flat Washer
Spring Washer
Collar for Securing Left and Right Stands (
9
)
Bolt for
Securing Left and
Right Stands (
8
)
Bolt A
Bolt A
UE-608030_EN.book 37 ページ ２０１０年１０月２８日 木曜日 午後４時２０分
