Wall Mounting Construction
27
Installation Manual
•
The position where the knob is to be secured
depends on the projector which is going to be
used.
Notice
•
Keep the other knob for future use. After all
installation work is finished, attach the knob to an
empty hole on the board bracket (
7
) on the back
of the board.
3
Insert the projector arm from above into the
pipe holding post of the up/down frame.
•
Introduce the ends of the power cable and video
cable which have already been passed through
the projector arm into the pipe holding post, and
then insert the projector arm.
Notice
•
When mounting the projector arm, ensure that its
end does not hit anybody or anything in the
vicinity.
4
Mount the projector bracket, on which the projector
unit has been mounted, onto the projector arm.
•
The position where the projector is to be
mounted depends on the model which is going to
be used. Adjust the distance from the longer end
of the projector arm (the part where the projector
is mounted) to the projector bracket to what is
indicated below, and secure the projector.
5
Tighten up the screw (
F
) for securing the pipe
bracket, and loosely secure the bracket to the
projector arm.
Top position
Panasonic PT-ST10
Center
position
EPSON EB-410W
Acer S1200
BenQ
MP772ST / MP776ST / MP782ST
Bottom
position
SANYO LP-WXL46(S)
Optoma EX525ST
Pipe Hold Post
Model
A
Panasonic PT-ST10
22 cm (8
21
/
32
in.)
EPSON EB-410W
6 cm (2
3
/
8
in.)
Acer S1200
8 cm (3
5
/
32
in.)
BenQ MP782ST
8 cm (3
5
/
32
in.)
BenQ MP772ST / MP776ST
4 cm (1
9
/
16
in.)
SANYO LP-WXL46(S)
4 cm (1
9
/
16
in.)
Optoma EX525ST
8 cm (3
5
/
32
in.)
A
Screw for Securing Pipe Bracket (
F
)
UE-608030_EN.book 27 ページ ２０１０年１０月２８日 木曜日 午後４時２０分
