Wall Mounting Construction
34
Installation Manual
Wiring Connections
1
Position the computer which you are going to
use at the prescribed location, and connect the
computer, projector and elite Panaboard as
shown below.
2
Connect the power cables of the computer,
projector and elite Panaboard to the table tap,
and connect the plug of the table tap to the
power outlet.
Apply the High-Temperature
Warning Label
1
Turn on the power of the computer, projector
and elite Panaboard in this order.
2
Apply the high-temperature warning label to
the projector sub-bracket.
•
When projector vents face the right or left side,
the projector sub-bracket may become hot.
On
the bracket by projector vents
, apply the high-
temperature warning label (
K
), as shown in the
figure.
Projector
Power Cable 1
Video Cable
elite Panaboard
Power Cable 2
Computer
Power Cable 3
USB Cable
Video Cable
High-Temperature Warning Label (
K
)
UE-608030_EN.book 34 ページ 2010年10月28日 木曜日 午後4時20分