103
■
Priority Lock
This function is used to retain control of a monitor for an
operator, even after that operator has selected another
monitor.
Caution:
This function will prevent operators with a lower
priority from gaining control of a monitor.
However, higher or equal priority operators may still
gain control of that monitor.
●
Applying Priority Lock
1. Select the desired monitor to apply Priority Lock.
Refer to the Monitor Selection.
2. Pressing the
[MONITOR]
button while holding down
the
[SHIFT]
button will toggle the Priority Lock mode on
and off on the active monitor.
If the Priority Lock mode is selected, the monitor num-
ber with “L” sign is displayed on the active monitor and
the MONITOR LOCK indicator on the controller is on.
●
Releasing Priority Lock
1. Select the desired monitor to release Priority Lock.
Refer to the Monitor Selection.
2. Pressing the
[MONITOR]
button while holding down
the
[SHIFT]
button will release the lock mode.
The monitor number is displayed normally on the active
monitor and the MONITOR LOCK indicator on the con-
troller is now off.
AUX1 OFF
ALM S
CAM ID
T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT
BLK
EXIT
CLEAR
(ESC)
DEF OFF
DEF ON
MON STATUS
NEXT
PREV
S-CTL ID
STOP
PAUSE
CAM MENU ON
CAM MENU OFF
TOUR
SEQ
GROUP
SEQ
MONITOR
LOCK
OSD SERVICE
CAM FUNC
OSD
OPE ID
GROUP PRESET
LOG OUT
F1
F2
