Panasonic System 850, Operating Instructions Manual

Page: 101 / 119

●
Auxiliary Control
The following function is available only when the WV-
RC100 or WV-RC150 Receivers are included in the sys-
tem.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Pressing the [2] button while holding down the [SHIFT]
button will turn on the user’s auxiliary switch 1 of the
Receiver.
Pressing the
[1] button holding down the [SHIFT] but-
ton will turn off the user’s auxiliary switch 1 of the
Receiver.
3. Press the [5] button while holding down the [SHIFT]
button will turn on the user’s auxiliary switch 2 of the
Receiver.
Pressing the
[4] button while holding down the [SHIFT]
button will turn off the user’s auxiliary switch 2 of the
Receiver.
106
■
Receiver Control
●
Camera Housing Control
The following function is available only when the WV-
RC100 or WV-RC150 Receivers are included in the sys-
tem and the specified camera housing is installed.
• Wiper Control
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera
Selection.
2. Pressing the [3] button while holding down the
[SHIFT] button will turn on the Housing Wiper of
the camera until buttons are released.
• Defroster Control
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera
Selection.
2. Pressing the [8] button while holding down the
[SHIFT] button will turn on the housing defroster of
the camera.
To turn off the defroster, pressing the
[7] button
while holding down the [SHIFT] button.
AUX1 OFF
ALM S
CAM ID T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT BLK EXIT
CLEAR
(ESC)
DEF OFF DEF ON
MON STATUS
SHIFT BLK EXIT
AUX1 OFF
ALM S
CAM ID T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
CLEAR
(ESC)
DEF OFF DEF ON
MON STATUS
AUX1 OFF
ALM S
CAM ID T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT BLK EXIT
CLEAR
(ESC)
DEF OFF DEF ON
MON STATUS