109
■
Camera Panning Function
The following function requires the use of cameras
equipped with this specific feature.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Press the
[F2]
button four times.
“PAN” as shown in the figure will appear on the LED
display of the controller.
3. Press the assigned numeric button shown below to
activate the panning function of the selected camera.
The LED display indicates the selected mode as fol-
lows.
1:
Activates Auto Pan “PA PA”.
2:
Activates Sort Pan “PA SO”.
3:
Activates Sequence Pan “PA SE”.
4:
Activates Random Pan “PA RP”.
Note:
The AUTO MODE parameter previously set in the
camera setup menu will be automatically replaced
to the activated function parameter.
4. To exit from the mode, press the
[CLEAR (ESC)]
but-
ton.
RESET
ACK
ALARM
DISARM
ALL RESET
NEXT
PREV
S-CTL ID
STOP
PAUSE
CAM MENU ON
CAM MENU OFF
TOUR
SEQ
GROUP
SEQ
MONITOR
LOCK
OSD SERVICE
CAM FUNC
OSD
OPE ID
GROUP PRESET
LOG OUT
F1
F2
PROGRAM
PRESET
CALL
PRESET
AUX1 OFF
ALM S
CAM ID
T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT
BLK
EXIT
CLEAR
(ESC)
DEF OFF
DEF ON
CAMERA
(ENTER)
AUTO
PAN
MON STATUS
