66
• Position jumper connectors (CN101, CN151, CN201,
CN251, CN301, CN351, CN401, CN451, CN501,
CN551, CN601, CN651, CN701, CN751, CN801, and
CN851) on the board as shown below. The jumper con-
nector positions designate the stage of cages as
described previously.
Note: If the system is smaller than 1 024 inputs
times 128 outputs, the settings (factory default
settings) may not need to be changed for exten-
sions.
CN101
2
1
9
10
CN101
2
1
9
10
CN101
2
1
9
10
Initial-stage cage
Middle-stage cage
Final-stage cage
Crosspoint Output Boards
• Set switches (SW702 and SW703) on the WJ-PB85M16
Crosspoint Output Boards to designate the board num-
bers as shown in the following table.
Slot
No.
Video In/Out
SW Positions
SW703
SW702
17
18
Board
No.
1
2
0
0
0
1
1 - 16
17 - 32
• Position jumper connectors (CN217, CN218, CN219,
CN220, CN221, CN222, CN223, CN224, CN225,
CN226, CN227, CN228, CN229, CN230, CN231,
CN232) on the board to assign outputs as shown
below.
1
3
Output 1-16
1
3
Output 17-32
• Position jumper connectors (CN201, CN202, CN203,
CN204, CN205, CN206, CN207, CN208, CN209,
CN210, CN211, CN212, CN213, CN214, CN215,
CN216) on the board as shown below. The jumper con-
nector positions designate the stage of cages as
described previously.
Note: If the system is smaller than 1 024 inputs
times 128 outputs, the settings (factory default
settings) may not need to be changed for exten-
sions.
CN201
2
10
1
9
Initial-stage cage
CN201
2
10
1
9
Middle-stage cage
CN201
2
10
1
9
Final-stage cage
For other DIP switch settings, refer to the Board
Setting of the individual board.
