107
Camera Function Control
■
Camera Setup
The following function requires the use of cameras
equipped with this specific feature.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Pressing the
[STOP]
button while holding down the
[SHIFT]
button will open the Camera Setup Menu on
the active monitor.
The STOP indicator will light.
3. Select the desired item in the menu by moving the
Joystick Controller
UP
and
DOWN
, and then select the
desired parameter (or mode) in the menu by moving
the Joystick Controller
L
and
R
.
Press the
[CAMERA (ENTER)]
button to execute the
currently highlighted selection and to enter a submenu
of the Camera Setup Menu, or press the
[CLEAR
(ESC)]
button to leave from the currently selected
menu and return to the previous page of the menu.
4. Press the
[RESET]
button in the menu to reset the
parameter of a selected item to the factory default set-
ting or enter the Special Camera Menu when the cursor
is positioned on SPECIAL in the menu.
Pressing the
[RESET]
button while holding down the
[SHIFT]
button will restore all factory default settings.
Notes:
• Refer to the Operating Instructions of the selected
camera for more details.
• Moving the joystick while holding down the
[SHIFT]
button will move the camera smoothlyfor presetting
the position in the camera setup menu.
5. To close the Camera Setup Menu, press the
[PAUSE]
button while holding down the
[SHIFT]
button.
The STOP indicator will go off.
■
Camera Function (Shortcut
Function)
The following function is available only when specified cam-
eras with the camera function feature are used.
This function enables executing camera functions via a
shortcut.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Press the
[F2]
button.
“F----” as shown in the figure will appear on the LED
display of the controller.
3. Select an assigned function number by pressing the
numeric buttons, then press the
[CAMERA (ENTER)]
button.
For example, enter 175 for AGC On.
The selected function will be executed on the active
monitor.
Note:
For further information, refer to the Operating
Instructions for that camera.
4. To exit from the mode, press the
[CLEAR (ESC)]
but-
ton.
RESET
ACK
ALARM
DISARM
ALL RESET
NEXT
PREV
S-CTL ID
STOP
PAUSE
CAM MENU ON
CAM MENU OFF
TOUR
SEQ
GROUP
SEQ
MONITOR
LOCK
OSD SERVICE
CAM FUNC
OSD
OPE ID
GROUP PRESET
LOG OUT
F1
F2
PROGRAM
PRESET
CALL
PRESET
AUX1 OFF
ALM S
CAM ID
T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT
BLK
EXIT
CLEAR
(ESC)
DEF OFF
DEF ON
CAMERA
(ENTER)
AUTO
PAN
MON STATUS
RESET
ACK
ALARM
DISARM
ALL RESET
NEXT
PREV
S-CTL ID
STOP
PAUSE
CAM MENU ON
CAM MENU OFF
TOUR
SEQ
GROUP
SEQ
MONITOR
LOCK
OSD SERVICE
CAM FUNC
OSD
OPE ID
GROUP PRESET
LOG OUT
F1
F2
PROGRAM
PRESET
CALL
PRESET
AUX1 OFF
ALM S
CAM ID
T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT
BLK
EXIT
CLEAR
(ESC)
DEF OFF
DEF ON
CAMERA
(ENTER)
AUTO
PAN
MON STATUS
