100
Before starting the following procedures, all system compo-
nents must be turned on.
The following procedures apply when the WV-CU350
System Controller is connected to the system.
■
Log-in
1. Turn on the power switches of all system components.
2. Turn on the power of the WV-CU350 System Controller
by connecting the AC adapter to the AC outlet.
The LINK indicator lights up and “NO USER” will
appear on the LED display of the system controller.
3. Select your registered operator ID number (up to 5 dig-
its) by pressing the numeric buttons, then press the
[CAMERA (ENTER)]
button.
The underline display now appears on the LED display
of the controller.
4. Select your registered Password (up to 5 digits) by
pressing the numeric buttons, then press the
[CAM-
ERA (ENTER)]
button.
If operator ID and password are correct, “READY” will
appear on the LED display.
Note:
If an operator ID and password error have
occurred, the PROHIBITED indicator on the con-
troller will light up and “NO ACCESS” will blink on
the LED display for about 3 seconds. Then the
Log-in procedure automatically returns to the start.
Log-in and Log-out
PROGRAM
PRESET
CALL
PRESET
AUX1 OFF
ALM S
CAM ID
T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT
BLK
EXIT
CLEAR
(ESC)
DEF OFF
DEF ON
CAMERA
(ENTER)
AUTO
PAN
MON STATUS
PROGRAM
PRESET
CALL
PRESET
AUX1 OFF
ALM S
CAM ID
T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT
BLK
EXIT
CLEAR
(ESC)
DEF OFF
DEF ON
CAMERA
(ENTER)
AUTO
PAN
MON STATUS
