80
■
Priority Lock
This function is used to retain control of a monitor for an
operator, even after that operator has selected another
monitor.
Caution:
This function will prevent operators with a lower
priority from gaining control of a monitor.
However, higher or equal priority operators may still
gain control of that monitor.
●
Applying Priority Lock
1. Select the desired monitor to apply Priority Lock.
Refer to the Monitor Selection.
2. Pressing the
[MONITOR]
key while holding down the
[SHIFT]
key will toggle the Priority Lock mode on and
off on the active monitor.
If the Priority Lock mode is selected, the monitor num-
ber with “L” sign is displayed on the active monitor and
the MONITOR LOCK indicator on the controller is on.
●
Releasing Priority Lock
1. Select the desired monitor to release Priority Lock.
Refer to the Monitor Selection.
2. Pressing the
[MONITOR]
key while holding down the
[SHIFT]
key will release the lock mode.
The monitor number is displayed normally on the active
monitor and the MONITOR LOCK indicator on the con-
troller is now off.
INFORMATION
Mon Lock
CAM ID
VLD S
T&D
ALM S
GEN
SYS S
(ALARM)
0
8
7
MSTATUS
VLD H
ALL
ALM H
BLK
5
9
6
4
2
3
1
SHIFT
CLEAR
(ESC)
EXIT
GROUP
PRESET
PREV
S-CTL ID
OPE ID
NEXT
GROUP
SEQ
PAUSE
STOP
TOUR
SEQ
R E V
RU N
F W D
RU N
OSD
VER
MONITOR
LOCK
OSD SERVICE
INFORMATION
Mon Unlock
