117
Alarm Control
When cameras and monitor are armed for alarm response
with an alarm inputs, the camera pictures associated with
that alarm input is displayed on the monitor when the alarm
is received.
When an alarm is received, the ALARM indicator lights. The
indicator remains lit until all alarms are cleared by pressing
the RESET button.
■
Alarm Arming Control
1. Select an alarm number by pressing the numeric but-
tons, followed by the
[ALARM]
button.
2. Pressing the
[ALARM]
button repeatedly will arm or
disarm cameras and monitor for alarm response with
the selected alarm.
The DISARM indicator will light on the controller when
the alarm disarm mode is selected.
3. Pressing the
[NEXT]
button while holding down the
[ALARM]
button will select the next higher alarm num-
ber, or pressing the
[PREV]
button while holding down
the
[ALARM]
button will select the next lower alarm
number.
4. Pressing the
[ALARM]
button repeatedly will arm or
disarm cameras and monitor for alarm response with
the selected alarm.
5. To exit from alarm selecting mode, press the
[CLEAR
(ESC)]
button.
■
To Cancel Alarms
1. Select an activated alarm number that is displayed on
the active monitor by pressing the numeric buttons, fol-
lowed by the
[ALARM]
button.
2. Select the alarm action number by pressing the numer-
ic button, then press the
[ACK]
button to acknowledge
the activated alarm manually.
The acknowledged alarm picture is displayed on the
active monitor, and the ACK indicator on the controller
is turned on.
Note:
By the factory default setting, pressing only the
[ACK] button will interpret it as the alarm action #0.
3. After acknowledging the alarm, press the
[RESET]
but-
ton to reset the alarm.
The ACK indicator will go off.
Note:
All reset function is available without selecting
the activated alarms. Pressing the
[RESET]
button
while holding down the
[SHIFT]
button will cancel
all currently activated alarms at once.
RESET
ACK
ALARM
DISARM
ALL RESET
NEXT
PREV
S-CTL ID
STOP
PAUSE
CAM MENU ON
CAM MENU OFF
TOUR
SEQ
GROUP
SEQ
MONITOR
LOCK
OSD SERVICE
CAM FUNC
OSD
OPE ID
GROUP PRESET
LOG OUT
F1
F2
AUX1 OFF
ALM S
CAM ID
T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT
BLK
EXIT
CLEAR
(ESC)
DEF OFF
DEF ON
MON STATUS
RESET
ACK
ALARM
DISARM
ALL RESET
NEXT
PREV
S-CTL ID
STOP
PAUSE
CAM MENU ON
CAM MENU OFF
TOUR
SEQ
GROUP
SEQ
MONITOR
LOCK
OSD SERVICE
CAM FUNC
OSD
OPE ID
GROUP PRESET
LOG OUT
F1
F2
AUX1 OFF
ALM S
CAM ID
T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT
BLK
EXIT
CLEAR
(ESC)
DEF OFF
DEF ON
MON STATUS
