Section 700 - Operation
Chapter 3. System Features
S-ICX-50-700
S-ICX (International) issued October 2000
51
SSD Names:
To set SSD names using a large-display or small-display phone:
Hardware Requirements
•
N/A
Considerations
•
PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16
characters.
Action
Result
1. Lift the handset or press the
ON/OFF
key.
2. Press the
PROG
key.
3. Press the
*
key.
4. Enter
1
for the SSD Name Assignment mode.
SSD
NO.=>
SSD NAME
displays
5. Enter the speed dial bin number (
00
-
79
or
000
-
799
).
6. Press the
HOLD
key.
-SSDXXX
A B C D E F XXX
displays (where XXX
= specified SSD bin number)
7. Press the
FL/R
key to clear the current data.
A B C D E F XXX
displays (where XXX
= specified SSD bin number)
8. Enter the speed dial name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
47.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 48.)
9. Use the bottom row of FF keys to select a single letter.
• See “Example 1. Large-display phone” on page 47.
• See “Example 2. Small-display phone” on page 48.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
10. Repeat steps 8-9 as many times as necessary to enter the
desired SSD name.
Note:
Press the
FL/R
key to clear the entire entry.
11. Press the
HOLD
key when finished.
Next SSD bin number displays
12. To enter another speed dial name, press the
CONF
key and
repeat steps 5-11.
SSD
NO.=>
SSD NAME
displays
