manualshive.com logo in svg

Panasonic S-ICX, Technical Manual

The Panasonic S-ICX Technical Manual is a comprehensive user guide designed to assist you in maximizing your product experience. This manual provides step-by-step instructions, troubleshooting tips, and technical specifications. Download this valuable resource for free from manualshive.com and unlock the full potential of your Panasonic S-ICX.

Share
Download
background image

246

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 6. DSLT Features

Section 700 - Operation

Paging

Description

The System allows you to make both internal and external pages and announcements. Internal pages 
are made via the System’s key telephone speakers. External pages are made through the speakers of 
an external paging system connected to the System.

Paging calls can be answered from any extension using the Meet-Me Answer feature.

Operation

To make a page:

Meet-Me Answer

To answer a page using Meet-Me Answer:

Hardware Requirements

•

External relays, amplifier, and speakers are required for external paging. 

Considerations

•

If an external paging system has been connected, pages can be made to paging groups 

0

-

9

 

through the external speakers. Voice paging can also be heard over the extensions in groups 

0

-

9

.

•

An extension can belong to more than one paging group.

•

Only one page may be performed at a time. If you attempt to make a page while another 
extension is paging, you will receive a busy signal.

•

Beginning with Version 4.5 and higher, the paging system can be set to “timeout” if a page 
remains unanswered for a specified length of time (0 to 255 seconds). If this feature is set and the 
timeout period has elapsed, the page originator’s handset will emit a Fast Busy Tone.

Action

Result

1.   Lift the handset or press the 

ON/OFF

 key.

Intercom dial tone

2.   Enter the Group Paging code (default = 

#

).

3.   Enter the number of the desired paging group (

0-9

).

4.   Make your announcement.

5.   Replace the handset or press the 

ON/OFF

 key.

Action

Result

1.   Lift the handset or press the 

ON/OFF

 key.

Intercom dial tone

2.   Enter the Meet Me Answer code (default = 

#

#).

Connected to specified party

Summary of Contents for S-ICX








































































































































































































































































































































Reviews:

No comments

Related manuals for S-ICX

D-Link DWR-720 User'S Setup Manual preview
DWR-720
Brand: D-Link Pages: 2
Eaton UltraShift PLUS Service Manual preview
UltraShift PLUS
Brand: Eaton Pages: 266
KAM KWM1932 HH Instruction Manual preview
KWM1932 HH
Brand: KAM Pages: 4
Nady Systems DKW-3 HT Owner'S Manual preview
DKW-3 HT
Brand: Nady Systems Pages: 8
Teac GF-650 Service Manual preview
GF-650
Brand: Teac Pages: 23
Roadpost Swiss oneRoam International Cellular User Manual preview
Swiss oneRoam International Cellular
Brand: Roadpost Pages: 11
VTech CS2000 Series Manual preview
CS2000 Series
Brand: VTech Pages: 46
JBL AM7212/95p Quick Start Manual preview
AM7212/95p
Brand: JBL Pages: 2
Aastra M725 User Manual preview
M725
Brand: Aastra Pages: 62
TechMatte amFilm GLS2 Installation Manual preview
amFilm GLS2
Brand: TechMatte Pages: 2
GE 26980/26981 User Manual preview
26980/26981
Brand: GE Pages: 64
Cobra antenna AN - 8630 - 25 User Manual preview
antenna AN - 8630 - 25
Brand: Cobra Pages: 16
Huawei DCO-LX9 User Manual preview
DCO-LX9
Brand: Huawei Pages: 125
AEG Voxtel D220BT Quick Start Manual preview
Voxtel D220BT
Brand: AEG Pages: 176
Aastra 312w User Manual preview
312w
Brand: Aastra Pages: 84
Philips FW768P Specifications preview
FW768P
Brand: Philips Pages: 2
Philips FW768P User Manual preview
FW768P
Brand: Philips Pages: 31
Siemens 240 Series Owner'S Manual preview
240 Series
Brand: Siemens Pages: 16

Brands by name

Popular brands

Load more brands