Panasonic S-ICX Technical Manual Download Page 173

Page: 173 / 327

Section 700 - Operation

Chapter 5. Key Telephone Features

S-ICX-50-700

S-ICX (International) issued October 2000

173

Operation

To automatically call back an extension that left a message or to access Voice Mail:

Hardware Requirements

•

N/A

Considerations

•

The

MSG FF

key must be assigned first (default =

*08

•

The

Message

lamp lights when a message has been received.

•

If more than one callback message has been received, pressing the

MSG FF

key performs auto-

callback in the order received.

•

The

MSG FF

key works only when the phone is idle or receiving internal dial tone.

•

Auto-callback is always enabled for large display phones.

•

Messages are accessed in a first-in, first-out order for Message Wait, except Priority Message
Wait, which is typically sent by Voice Mail.

Message Waiting/Callback

Description

If you try to call an extension that is busy or does not answer, you can leave a message wait indication
at that extension, requesting a return call.

Operation

To leave a message waiting indication:

Action

Result

1. Press the

MSG FF

key.

Automatically call back to extension

OR...

Automatic access to Voice Mail

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Dial the extension number.

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands