Panasonic S-ICX Technical Manual Download Page 305

Page: 305 / 327

Section 700 - Operation

Chapter 7. SLT Features

S-ICX-50-700

S-ICX (International) issued October 2000

305

Hardware Requirements

•

N/A

Related Programming

•

N/A

Considerations

•

An alarm tone (default = 60 seconds) will be issued at the specified time.

•

An extension can have only one Reminder Call set at a time.

•

To change the Reminder Call, simply enter a new time.

•

If the extension is in use when the reminder call is scheduled, the reminder call is issued 3
minutes later.

Trunk Access

Description

The System supports the following ways to seize an idle trunk to make an outside call:

•

Direct Trunk Access

•

MCO Trunk Access

Direct Trunk Access

Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access
to test trunks or to access data trunks.

Operation

To use Direct Trunk Access:

Hardware Requirements

•

N/A

Related Programming

•

FF1-0-03: Extension COS (Direct Trunk Access)

•

FF3: Extension COS

Considerations

Action

Result

1. Lift the handset.

2. Enter the Direct Trunk Access code (default =

3. Enter the desired trunk number.

Outside dial tone

4. Dial the phone number.

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands